When the Terminal Operating Mode is changed from PMP to PTP or vice versa, the following popup will warn
of the ‘restore to factory default settings’.
SR Compatible
The SR Compatible option enables over-the–air point-to-multipoint interoperation between an Aprisa SR+
network and New Aprisa SR radios. The default setting is unticked.
When the Aprisa SR+ ‘SR Compatible’ option is activated, the Aprisa SR+ locks its modulation to QPSK (as
per the New Aprisa SR modulation) and disables functionality which is not available in New Aprisa SR for full
compatibility / interoperability operation.
This compatibility option allows the user a smooth migration to Aprisa SR+ when higher speeds of 120,
60 kbit/s (at 25, 12.5 kHz channel sizes), Adaptive Coding and Modulation, full duplex and more features
are required.
Note: Any mix between the New Aprisa SR and Aprisa SR+ in the network will force the whole network to
work in SR Compatible mode.
To Next Page
Loading...
