4RF Aprisa SR+ - Page 193

Managing the Radio | 193
Aprisa SR+ User Manual 1.11.1
Gateway Address
This parameter sets the gateway address where packets will be forwarded to.
• If the gateway interface is set to Ethernet Ports, the gateway address is the IP address of the device
connected to the Ethernet port.
• If the gateway interface is set to Radio Path, the gateway address is the IP address of the remote
radio.
Gateway Interface
This parameter sets the destination interface.
Option
Function
Ethernet Ports
Packets are forwarded to the Ethernet interface port.
Radio Path
Packets are forwarded to the RF Interface radio path.