IP > IP Routes
This page is only available if the Ethernet traffic option has been licensed (see ‘Maintenance > Licence’ on
page 270) and Router Mode selected. It is not valid for Bridge Mode (see 'Terminal > Operating Mode’ on
page 119).
NETWORKING IP STATIC ROUTE SETTINGS
Static routing provides the ability to evaluate traffic to determine if packets are forwarded over the radio
link or discarded based on the route criteria.
Route Index
This parameter shows the route index.
Destination Address
This parameter defines the destination IP address of the route criteria.
Destination Mask
This parameter defines the subnet mask applied to the Destination IP Address. 255 means that it must be a
match.
If the destination subnet mask is set to 255.255.255.255, all octets of the Destination IP Address will be
evaluated for the route criteria.
If the destination subnet mask is set to 255.255. 0.0, the first 2 octets of the Destination IP Address will be
evaluated for the route criteria.
To Next Page
Loading...
