4RF Aprisa SR+ - Page 237

Managing the Radio | 237
Aprisa SR+ User Manual 1.11.1
SECURITY LEVEL SETTINGS
Security Level
This parameter sets the Security Level active security features. The default setting is Standard.
Option
Payload
Encryption
HTTPS
SNMPv3
USB KEK Only
Standard
✓
✓
✓
Strong
✓
✓
✓
✓
If the Security Level is reduced, there will be a pop up message warning that Key Encryption Key will be
reset to the default value.
If the Security Level is increased, there will be a pop up message reminding user to enter a new Key
Encryption Key.
If the Security Level is set to Strong, the ‘Save’ button will be grayed out and the ‘Copy To USB’ button will
not be shown.