4RF Aprisa SR+ - Page 310

310 | Managing the Radio
Aprisa SR+ User Manual 1.11.1
Monitoring > Serial
This page displays the current radio performance monitoring parameters per serial port in packet and byte
level granularity, for serial port high level statistics and troubleshooting.
The results shown are since the page was opened and are updated automatically every 12 seconds.
SERIAL PORT PARAMETERS
All Serial Ports
Monitored Parameter
Function
Normal Operating Limits
Maximum Capacity
Parameter to show the maximum serial
data rate of the serial port
Equal to the serial port baud rate setting
Packets Transmitted
Parameter to show the number of packets
transmitted to the customer from the serial
port
Packets Received
Parameter to show the number of packets
received from the customer into the serial
port
Bytes Received
Parameter to show the number of bytes
received from the customer into the serial
port
Errored Bytes Received
Parameter to show the number of bytes
received from the customer into the serial
port that have errors
Dropped Bytes (Congestion)
Parameter to show the number of bytes
received from the customer into the serial
port that are dropped due to over the air
congestion
Controls
The Reset button clears the current results.