4RF Aprisa SR+ - Page 311

Managing the Radio | 311
Aprisa SR+ User Manual 1.11.1
Monitoring > Ethernet
This page displays the current radio performance monitoring parameters per Ethernet port transmission (TX)
out of the radio in packet and byte level granularity, for Ethernet port high level statistics and
troubleshooting.
The results shown are since the page was opened and are updated automatically every 12 seconds.
ETHERNET PORT PARAMETERS
All Ethernet Ports TX (out)
Monitored Parameter
Function
Normal Operating Limits
Maximum Capacity
Parameter to show the maximum Ethernet
data rate of the Ethernet port
Equal to the Ethernet port speed setting
Packets
Parameter to show the number of packets
transmitted to the customer from the
Ethernet port
Bytes
Parameter to show the number of bytes
transmitted to the customer from the
Ethernet port
Packet Collisions
Parameter to show the number of packet
collisions on the data transmitted to the
customer from the Ethernet port on a
shared LAN
VLAN Frames
Parameter to show the number of VLAN
tagged frames transmitted to the customer
from the Ethernet port