4RF Aprisa SR+ - Page 313

Managing the Radio | 313
Aprisa SR+ User Manual 1.11.1
This page displays the current radio performance monitoring parameters per Ethernet port received (RX)
data in packet and byte level granularity, for Ethernet port high level statistics and troubleshooting.
The results shown are since the page was opened and are updated automatically every 12 seconds.
ETHERNET PORT PARAMETERS
All Ethernet Ports RX (in)
Monitored Parameter
Function
Packets
Parameter to show the number of packets received from the customer into the Ethernet
port (including broadcasts, multicasts, unicasts, FCS/CRC error, alignment error,
undersize, jabber, oversize, and fragments)
Bytes
Parameter to show the number of bytes received from the customer into the Ethernet port
(including broadcasts, multicasts, unicasts, FCS/CRC error, alignment error, undersize,
jabber, oversize, and fragments and excluding IFG framing bytes/bits)
Packets equal to 64 bytes
Parameter to show the number of packets received from the customer into the Ethernet
port that are equal to 64 bytes (including broadcasts, multicasts, unicasts, FCS/CRC error,
alignment error, undersize, jabber, oversize, and fragments)
Packets 65 to 127 bytes
Parameter to show the number of packets received from the customer into the Ethernet
port that are between 65 and 127 bytes (including broadcasts, multicasts, unicasts,
FCS/CRC error, alignment error, undersize, jabber, oversize, and fragments)
Packets 128 to 255 bytes
Parameter to show the number of packets received from the customer into the Ethernet
port that are between 128 and 255 bytes (including broadcasts, multicasts, unicasts,
FCS/CRC error, alignment error, undersize, jabber, oversize, and fragments)
Packets 256 to 511 bytes
Parameter to show the number of packets received from the customer into the Ethernet
port that are between 256 and 511 bytes (including broadcasts, multicasts, unicasts,
FCS/CRC error, alignment error, undersize, jabber, oversize, and fragments)
Packets 512 to 1023 bytes
Parameter to show the number of packets received from the customer into the Ethernet
port that are between 512 and 1023 bytes (including broadcasts, multicasts, unicasts,
FCS/CRC error, alignment error, undersize, jabber, oversize, and fragments)
Packets 1024 to 1536 bytes
Parameter to show the number of packets received from the customer into the Ethernet
port that are between 1024 and 1536 bytes (including broadcasts, multicasts, unicasts,
FCS/CRC error, alignment error, undersize, jabber, oversize, and fragments)