Network Status > Summary
Network View is an overview of the health of the network providing the ability to investigate issues directly
within SuperVisor.
This page provides an overall summary view of the alarm status of all registered remote radios for the base
station. When open, it provides a continuous monitor of the network.
Depending on the poll period set (20 seconds minimum) and the number of remotes in the network, it will
take at least three poll cycles to indicate a failure in the network. Initial results may indicate ‘All ok’ until
at least three poll cycles completed. This could take ‘Number Of Remotes’ * ‘Poll Period’ * 3 seconds to
complete.
To Next Page
Loading...
