If a remote radio does not respond to a poll request within 10 seconds, the previous readings from that radio
will be presented. Connectivity to a remote radio will be show as ‘lost’ if the remote radio has not responded
to 3 consecutive poll requests.
If a remote radio on the list is detected to be responding to a poll request and no longer be in an alarmed
state, the entry for this remote radio will be removed from the list.
View Events
Clicking on View Events navigates to the Events page (see ‘Events’ on page 278) for the specific remote
radio where the radio events will be displayed.
View Parameters
Clicking on View Parameters navigates to the Monitoring page (see ‘Monitoring’ on page 308) for the specific
remote radio where the radio parameters will be displayed.
To Next Page
Loading...
