Protected Station: Maintenance > Advanced
This page provides the management and control of the Protected Station Maintenance Advanced settings.
NETWORK
See āMaintenance > Advancedā on page 276 for parameter details.
Discover Nodes
This parameter when activated triggers the base station to poll the network with Node Missed Poll Count
and Node Registration Retry values.
This command only needs to be carried out on the Protected Station Active radio This will update the
network table which is shared by the Standby radio.
Decommission Node(s)
This parameter when activated resets the network registrations to remove the entire network from service.
This command only needs to be carried out on the Protected Station Active radio This will update the
network table which is shared by the Standby radio.
Note: Take care using this option.
To Next Page
Loading...
