Protected Station: Software > Remote Distribution
This page provides the mechanism to distribute software to all remote protected stations into the Aprisa
SR+ network (network) and then activate it.
The Software Pack loaded into the base station with the file transfer process (see ‘Protected Station:
Software > Primary File Transfer’ on page 375) is distributed via the radio link to all remote radios from the
active radio.
The distribution process is monitored from this page.
When all remote radios receive the Software Pack version, the software can be remotely activated on all
remote radios.
This page is only available when the radio is configured as a Base Station.
REMOTE SOFTWARE DISTRIBUTION
Software Pack Version
This parameter displays the software pack version available for distribution on base station and activate on
all stations.
Status
This parameter displays the status of the software pack version.
If a Software Pack is not available, the status will display ‘Unavailable’ and the software distribution
mechanism will not work.
To Next Page
Loading...
