Operation Manual / 4 Product description / A130-M.. - A145-M..
Page 80 /
© Copyright 2017 ABB. All rights reserved.
Mark the casing position for assembly.
Figure 31: Removing the gas outlet casing
1. Attach lifting gear to the gas outlet casing (61001).
2. Loosen and remove nuts (51009).
3. If present: Loosen the support (61301) from the bracket.
4. Remove the gas outlet casing (61001), set it down properly in an appropriate place and
secure it.
5. Remove and dispose of the gasket (61002).
To Next Page
Loading...
