ABB ACQ80-04 - Identification (ID) Run

24 Start up and use
EN
ES
FI
FR
IT
PL
PT
RU
SV
TR
ZH
Start stop control
See parameter group 79 Start stop control (page 46).
The selected option is Operating mode, MSTIn1.
1) Operating mode – Options
available are Auto, Manual In1
Start; stop, ManualIn1P Start;
In2 Stop, Timed function,
Fieldbus A, and Embedded
fieldbus.
3) PV cell min voltage - The
minimum DC voltage at which
the drive operates.
5) Pump min speed - The
minimum motor speed at
which the drive operates.
.
2) Start DC voltage – The
minimum DC voltage
required to start the drive.
4) PV cell max voltage - The
maximum DC voltage at
which the drive operates.
6) Pump max speed - The
maximum motor speed at
which the drive operates.
Connection macro
Values are based on drive type. See parameter 96.04 Macro select (page 49).
1) Macro - Displays the
selected macro name. For
example, ABB standard (2-
wire).
2) I/O Connections - Displays
the selected macro-specific I/O
connections. See menu
description below.
→
Selected macro is ABB standard (2-wire)
1) ABB standard (2-wire) -
Default macro for general
purpose.
2) PID - Suitable for closed-
loop control systems such as
pressure control, flow
control, etc.
→
Displays the selected macro-specific I/O connections. The below example is I/O connection of
Pharma macro.
1) DI - Digital Inputs DI1...DI6
2) AI - Analog Inputs AI1...AI2
3) RO- Relay Outputs
RO1...RO3
4) AO1-Analog Outputs
AO1...AO2
5) AI1 and AI2 values
6) AO1 and AO2 values
3
1
5
4
2
6
MSTIn1
StDCVolt
225
PVminV
225
PVmaxV
225
PminSpd
1000
PmaxSpd
3000
1
2
1
2
PID
0
0
0
0
0
0
DI1
DI2
DI3
DI5
DI4
DI6
AI1 0.000V
AI2 0.000mA
RO2
R03
RO1
1
0
1
AO1 0.000mA
AO2 0.000mA
1
2
3
4
5
6
ACQ80R0-R8 QIG.book Page 24 Friday, February 1, 2019 1:18 PM