ABB ACQ80-04 - Loading Package Name

32 Parameters List
EN
ES
FI
FR
IT
PL
PT
RU
SV
TR
ZH
06.29 MSW bit 10 selection False[0], True[1],
Above limit[2]
- Above limit[2]
06.30 MSW bit 11 selection False[0], True[1],
Ext ctrl loc[2]
- Ext ctrl loc[2]
06.31 MSW bit 12 selection False[0], True[1],
Ext run enable [2]
-
Ext run enable
[2]
06.32 MSW bit 13 selection
False[0], True[1] -
False[0]
06.33 MSW bit 14 selection
False[0], True[1] -
False[0]
07 System info
07.03 Drive rating id - - Not selected
07.04 Firmware name - - -
07.05 Firmware version 0.00.0.0...
255.255.255.255
- 0.00.0.0
07.06 Loading package name - - -
07.07 Loading package version 0.00.0.0...
255.255.255.255
- 0.00.0.0
07.11 CPU usage 0…100 % 0
10 Standard DI, RO
10.02 DI delayed status 0b0000...0b1111 - 0b0000
10.03 DI force selection See parameter 10.02 DI
delayed status
-
0b00000b000
00b0000
10.04 DI forced data See parameter 10.02 DI
delayed status
- 0b0000
10.21 RO status 0b0000...0b1111 - 0b0000
10.22 RO force selection See parameter 10.21 RO
status
- 0b0000
10.23 RO forced data See parameter 10.21 RO
status
- 0b0000
10.24 RO1 source 0...2, 4...24, 27...35, 45...48 - Ready run[2]
Index Name Range/List Unit Default
Bit Name Bit Name Bit Name Bit Name
0 DI1 2 DI3 4 DI5 6…15 Reserved
1 DI2 3 DI4 5 DI6
Bit Name Bit Name Bit Name Bit Name
0 RO1 1 RO2 2 RO3 3…15 Reserved
Not energized[0] Above limit[12] Remote control[24] RO/DIO control word bit2[42]
Energized[1] Warning[13]
Timed function 1[27] -
Not applicable.
PFC1[45] - Not applicable
Ready run[2] Fault[14]
Timed function 2[28] -
Not applicable.
PFC2[46] - Not applicable
Enabled[4] Fault (-1) [15]
Timed function 3[29] -
Not applicable.
PFC3[47] - Not applicable
Started[5] Fault/Warning[16]
Reserved[30...32]
PFC4[48] - Not applicable
Magnetized[6]
Overcurrent[17] Supervision 1[33] Event word 1[53]
Running [7] Overvoltage[18] Supervision 2[34] User load curve[61]
Ready ref[8] Drive temp[19] Supervision 3[35] RO/DIO control word[62]
At setpoint[9]
Undervoltage[20] Start delay[39] Other [bit]
Reverse[10] Motor temp[21]
RO/DIO control word
bit0[40]
RO/DIO control word
ACQ80R0-R8 QIG.book Page 32 Friday, February 1, 2019 1:18 PM