53
…4.5 Level 9 – Set Point Configuration 9.12...9.14
4 CONFIGURATION MODE…
Local/Remote Set Point Selection Source
The source required to lock into remote set point mode.
When the source is active the
L
L
R
key does not operate.
See Rear Fold-out/ Table C –
Digital Sources.
Local Set Point Selection Source
The source required to select local set point mode.
See Rear Fold-out/ Table C –
Digital Sources.
Remote Set Point Selection Source
The source required to select remote set point mode.
See Rear Fold-out/ Table C –
Digital Sources.
Return to top of page.
NONE
Lr.5r
9.12
NONE
r.SrC
9.14
NONE
LC.5r
9.13
Local
Remote
Local
Local Set Point Mode
Remote Set Point Mode
•1
•1
•1
•1
•1
•1
SEt.P
LEV9
•1 Digital inputs are active when a volt-free contact is closed or a low TTL signal is applied
To Next Page
Loading...
