ABB ControlMaster CM30 - Analog Sources; A.2 Analog Sources

ControlMaster CM30, CM50 and CMF310
Universal process controllers,
1
/4,
1
/2 DIN and fieldmount Appendix A – Digital and Analog
IM/CM/ED–EN Rev. X 105
A.2 Analog Sources
Source Name Description
Anlg IP 1 (4) Analog input
Constant 1 (8) Math block constant
Linearizer 1 (2) Custom linearizer
Loop 1 Actual Ratio
Loop 1 (2) actual ratio. Applies to ratio
application templates only
Loop 1 Control OP Control output value
Loop 1 Deviation Loop 1 (2) deviation
Loop 1 Feedforward Loop 1 (2) output of feedforward block
Loop 1 LSP Local setpoint loop
Loop 1 PV Loop 1 (2) process variable
Loop 1 Ration Loop 1 (2) desired ratio Loop
Loop 1 SP Loop control setpoint
Loop 1 Split OP1 Loop 1 split output
Loop 1 Valve Pos Motorized valve position
Loop Bias 1 Loop 1 desired bias
Math Block 1 (8) Math block
PV1 (2) Average Process variable average
PV1 (2) Max Maximum value of process variable 1 (2)
PV1 (2) Min Minimum value of process variable 1 (2)
T1 (2) Batch Total Totalizer batch total
T1 (2) Secure Total Totalizer secure total
User Value (Profile only)
Volume 1 (2) (Indicator only)