ABB ControlMaster CM30 - Profile Operator Page; Profile Operator Page Menu Functions

ControlMaster CM30, CM50 and CMF310
Universal process controllers,
1
/4,
1
/2 DIN and fieldmount 5 Operator Level Menus
IM/CM/ED–EN Rev. X 25
5.5 Profile Operator page
5.5.1 Profile Operator page menu
functions
Fig. 5.4 Profile Operator page
Menu Description
Run Start the selected profile program (from
Stop or Operator Hold).
Stop Stop a profile program that is running.
Reset Restart the profile from the beginning of
the program.
Hold Pause the currently running program
(Operator Hold).
Skip
Segment
Abandon the current segment and start
the next segment.
Repeat
Segment
Return to the beginning of the current
segment.
Fast Run
Mode
Run the profile 8 times faster than normal
rate.
Table 5.3 Profile Operator page menu functions
4:57h:m
PV
ºC
SP
20.0
10.0
ControlMaster
Stop
Hold
Reset
Skip Segment
Repeat Segment
Fast Run Mode
Select
Program
Enter