ABB ControlMaster CM30 - Display

ControlMaster CM30, CM50 and CMF310
Universal process controllers,
1
/4,
1
/2 DIN and fieldmount 7 Advanced Level
IM/CM/ED–EN Rev. X 37
7.2 Display
Used to setup the operator page, displayed language and display hardware
settings.
Language Selects the language on the controller's local display.
Operator Templates Enables up to 4 operator pages to be configured to suit the application requirements.
Page 1 (4) Template The operator template type.
The functions available in each template type are displayed as abbreviations, for
example:
Single PV, SP & OP
Key to abbreviations:
 PV = process variable
 SP = setpoint
 MOP = master output (A/M status and analog backups)
 OP = control output
 DV = disturbance variable (input to feedforward)
 Overview = displays PV, SP and OP for both loops
 Loop 1 (2) = displays PV, SP and SP for Loop 1 (2)
 AR = actual ratio
 DR = desired ratio
 Chart = trend display of up to 2 signals
 Profiler = setpoint profile generator
Menu
Display
Exit
Select