ABB EQmatic
Device technology
QA/S x.yy.1 | 2CDC512090D0202 21
Factory settings
To reset the device to the factory settings, an administrator must have access to the user interface (for
more information see: 3 Commissioning P. 23
). To restore the factory settings, go to System > Erase data
or use the Reset button (for more information see 2.5.2 Resetting the device P. 20).
Caution
This function allows you to delete all data and user-specific information from the system. The system is
reset to its supplied state. The most recently installed system update is retained. The following data are
reset to the factory settings or deleted:
• Devices/meters added to the system, and stored meter data
• Meter configurations and metering structure configured
• Users and associated information (users and passwords are reset to the factory settings)
• All system settings
• SSL certificates (if any)
To Next Page
Loading...
