ABB EQmatic - Erase Data

ABB EQmatic
Commissioning
QA/S x.yy.1 | 2CDC512090D0202 71
Erase data
This function allows you to delete all saved data and user-specific information from the system. The
system is reset to its supplied state. The most recently installed system update is retained. The
following data are reset to the factory settings or deleted:
• Devices or M-Bus or Modbus devices (meters)
• All meter data saved
• Meter configurations and metering structure configured
• Users and associated information (users and passwords are reset to the factory settings)
• All system settings
• SSL certificates (if any)
Press the "Erase user-sensitive data" button to reset the device to its supplied state.
Caution
This action cannot be undone. All data will be permanently deleted.