ABB EQmatic - Instantaneous Values Widget; Percentage Split Widget

ABB EQmatic
Commissioning
QA/S x.yy.1 | 2CDC512090D0202 79
3.4.4.1 Instantaneous values widget
Used to display measured values, e.g. power, current, voltage etc. in real time.
The following options are available to configure the widget
Options:
Building node
Medium
Value to display
Chart type
Building node: Used to select the meter and/or building section depending on the metering
structure configured
Medium: Used to select from the available media.
Options:
Electricity
Water
Gas
Heat
Value to display: Used to select from the available data points. The choice of data points is
dependent on the meter assigned and its properties.
Chart type: Used to select the required chart type for instantaneous values in the widget.
Options:
Serial chart
Gauge chart
Value
3.4.4.2 Percentage split widget
Used to display the relative distribution of total cost, income or CO
2
emissions. The values are
displayed according to the selected period (day, month, etc.) and available consumer groups.
The following options are available to configure the widget
Options:
Building node
Value to display
Building node: Used to select the meter and/or building section depending on the metering
structure configured.
Value to display: Used to select from the available values.
Options:
Cost
Income
CO
2