ABB EQmatic - Connecting to the Device; Access Via ABB I-Bus Tool

ABB EQmatic
Commissioning
24 2CDC512090D0202 | QA/S x.yy.1
3.1 Connecting to the device
Access via ABB i-bus
®
Tool
To access the device for initial commissioning, use the ABB i-bus
®
Tool.
The ABB i-bus
®
Tool is a free software application that provides help with commissioning.
Follow the instructions to connect to the device.
1. Download ABB i-bus
®
Tool and install on a Windows PC/laptop. Download link
2. Start ABB i-bus
®
Tool.
3. Click Connect and then IP devices and Discovery. The ABB i-bus
®
Tool automatically searches
for known IP devices on the local network. Click Refresh to restart the process if necessary.
4. Select the relevant QA/S device from the table of devices found.
5. Select "Open Website."
The web browser opens and the Start screen appears.
6. Enter your username and password;
default in supplied state.
User: admin
Password: admin
You are now connected to the web server for the device. Follow the instructions in the
commissioning wizard to proceed with commissioning.