ABB EQmatic - Tariffs and Units

ABB EQmatic
Commissioning
QA/S x.yy.1 | 2CDC512090D0202 57
Tariffs and units
The tariff settings are used to configure tariffs. This information is necessary for the subsequent
calculation and display of costs. Refer to your latest bill, or your contract, for details of your current
tariff.
One tariff is pre-configured per medium from the factory; the costs per unit are set to "0."
You can add further tariffs.
No.
Column header
Description
Add new
Opens a window where you can add a new tariff.
Name
Displays the name of the tariff configured.
Medium
Displays the medium for the tariff configured.
Cost per unit
Shows the configured cost of each unit for the tariff.
CO
2
factor
Shows the configured CO
2
conversion factor for the medium and unit. Conversion factors
are provided by e.g. environment agencies and industry associations.
Action
Used to edit and configure a new tariff
Opens the configuration window
Deletes the tariff from the system
1
2
3
4
5
6
1
2
4
5
3
6