ABB EQmatic - Page 94

ABB EQmatic
Commissioning
QA/S x.yy.1 | 2CDC512090D0202 93
No.
Parameters
Description
Name
Name/description of the report
Recipients
Recipient of the report (e-mail or FTP)
Values
Used to select the values to be sent in the report (e.g. consumption, costs, etc.).
Multiple selection possible.
Nodes
Used to select the required node or meter. Multiple selection possible.
Medium
Used to select the medium (e.g. electricity, gas, water, heat). Multiple selection
possible.
Resolution
Used to select the data resolution for the report (e.g. hourly, daily etc.)
Format
Used to select the file format for the report (e.g. XLSX, CSV, etc.)
Filename
Used to enter the file name
Period
Used to select the interval for sending or period for the report (e.g. 1 x / week)
Send on
Used to set the time when the report is to be sent for the first time
End on
Used to set the time when the report is to be sent for the last time
1
2
3
4
5
6
7
8
9
10
11
1
2
3
4
5
6
7
8
9
10
11