EasyManua.ls Logo

ABB ETL600 - Page 321

ABB ETL600
382 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Revision: Language: Page:
ETL600 System Test Report
_ EN B9/B11
HE
Test
No.
Test procedure
Test point
Permissible
value
Units
Test
result
B.10.9 Transit mode for
E&M wire
Mark if configured:
N11
[ ]
N22
[ ]
N54
[ ]
Test E-Wire:
Close and open at
Remote equ. at terminal,
telephony 4a-4b
Terminal, telephony
3a-3b
E-Wire must
toggle
N11
[ ]
N22
[ ]
N54
[ ]
B.10.10 Testing the
teleoperation ports
N11 N22 N34 N54 N65
B.10.11 Teleoperation AF1, if
not used for telephony
Mark if configured:
[ ] [ ] [ ] [ ] [ ]
Fed input level, [dBm],
@ 800 Hz at AF1-IN of
remote.
Expected Output
level at AF1-OUT
Measured Output level
at AF1-OUT
N11: ___________±1
N22: ___________±1
N34: ___________±1
N54: ___________±1
N65: ___________±1
Feed into rem. equ. at
terminal,
teleop. 1a-1b
Measure at terminal,
teleop. 2a-2b
ext. Boost not active.
N11: _______±1
N22: _______±1
N34: _______±1
N54: _______±1
N65: _______±1
dBm
(600 )
N11: ___________
N22: ___________
N34: ___________
N54: ___________
N65: ___________
N11 N22 N34 N54 N65
B.10.12 Teleoperation AF2
Mark if configured:
[ ] [ ] [ ] [ ] [ ]
Fed input level, [dBm],
@ 800 Hz at AF2-IN of
remote.
Expected Output
level at AF2-OUT
Measured Output level
at AF2-OUT
N11: ___________±1
N22: ___________±1
N34: ___________±1
N54: ___________±1
N65: ___________±1
Feed into rem. equ. at
terminal,
teleop. 3a-3b
Measure at terminal,
teleop. 4a-4b
ext. Boost not active.
N11: _______±1
N22: _______±1
N34: _______±1
N54: _______±1
N65: _______±1
dBm
(600 )
N11: ___________
N22: ___________
N34: ___________
N54: ___________
N65: ___________
N11 N22 N34 N54 N65
B.10.13 Teleoperation AF3
Mark if configured:
[ ] [ ] [ ] [ ] [ ]
Fed input level, [dBm],
@ 800 Hz at AF3-IN of
remote.
Expected Output
level at AF3-OUT
Measured Output level
at AF3-OUT
N11: ___________±1
N22: ___________±1
N34: ___________±1
N54: ___________±1
N65: ___________±1
Feed into rem. equ. at
terminal,
teleop. 5a-5b
Measure at terminal,
teleop. 6a-6b
ext. Boost not active.
N11: _______±1
N22: _______±1
N34: _______±1
N54: _______±1
N65: _______±1
dBm
(600 )
N11: ___________
N22: ___________
N34: ___________
N54: ___________
N65: ___________
© ABB Switzerland Ltd Form 1KHW001493-EN
Rev. A

Table of Contents

Related product manuals