Operation Manual / A150-M56/66/57/67 - A155-M..
11 Dismantling and fitting, cartridge concept / 11.2 Removing the com-
pressor casing
© Copyright 2022 ABB. All rights reserved. HZTL4032_EN Rev.S February 2022
11.2 Removing the compressor casing
u Mark the casing position for assembly.
Fig.87: Removing the compressor casing
1. Remove the compressor casing insulation.
2. Fit swivel lifting eye(S) to the compressor casing(72000). Secure lifting gear to the
swivel lifting eye.
3. Loosen screws(72011) and remove together with fastening strips(72012).
4. Remove the compressor casing(72000).
Page 136 / 198
To Next Page
Loading...