ABB HT611036 - Table 40: Dismantling Screw; Table 39: Press-Off Screws; Fig. 41: Dismantling Screw; Fig. 40: Press-Off Screws

Operation Manual / A150-M56/66/57/67 - A155-M..
9 Dismantling and fitting, general / 9.2 Material required
© Copyright 2022 ABB. All rights reserved. HZTL4032_EN Rev.S February 2022
Fig.40: Press-off screws
Product Thread Length Quantity
A150 M12 30 mm 3 or 6
A155 M16 30 mm 3 or 6
Table39: Press-off screws
Dismantling screw for the optional 6-nozzle turbine cleaning component
A dismantling screw(01) is required to dismantle and fit the cleaning nozzles, which is not
supplied by Turbo Systems.
Fig.41: Dismantling screw
Product Thread Length [mm] Quantity
A150-M M8 40 1
A155-M M10 50 1
Table40: Dismantling screw
Page 91 / 198