ABB IRB 1600 - 5/1.2 - Page 44

2 Installation and commissioning
2.2.2. Working range
3HAC023637-001 Revision: B42
Working ranges
Axis
IRB 1600 - 5/1.2
and - 7/1.2
IRB 1600- 5/1.45
and -7/1.45
Note
Axis 1 +180º to -180º +180º to -180º Axis 1 working range has the
following limitations:
• ±45º when tilting the robot
up to 30º.
• ±20º for a wall mounted
robot.
Axis 2 +110º to -63º +120º to -90º
+136º to -63º (with
axis 1 limited to ±100º)
+150º to -90º (with
axis 1 limited to ±95º)
Axis 3 +55º to -235º +65º to -245º
Axis 4 +200º to -200º +200º to -200º Default value
+190 to -190
revolutions
+190 to -190
revolutions
Maximum value.
The default working range for axis
4 can be extended by changing
parameter values in the software.
Axis 5 +115º to -115º +115º to -115º
Axis 6 +400º to -400º +400º to -400º Default
+288 to -288
revolutions
+288 to -288
revolutions
Maximum value.
The default working range for axis
6 can be extended by changing
parameter values in the software.
Continued
Continues on next page