Adjustments in RobotWare
NoteAction
RobotWare 5.0: change the settings in the
Modifying options dialogue, by using the
Modify Controller System Wizard in the Sys-
tem Builder of RobotStudio. Read more about
modifying the system in Operating manual -
RobotStudio.
Modify the settings in RobotWare to
include the cooling fans.
1
96 Product manual - IRB 6660
3HAC028197-001 Revision: S
© Copyright 2007-2018 ABB. All rights reserved.
2 Installation and commissioning
2.3.10 Installation of cooling fan for motors (option)
Continued
To Next Page
Loading...
