4.4.9 Replacement of parallel arm
Location of parallel arm
The parallel arm is located as shown in the figure below.
xx1000001381
Required equipment
NoteArt.no.Equipment, etc.
For spare part no. see:
• Spare parts on
page 355.
Parallel arm
D=120 mm, T=12 mm3HAA2166-23VK cover
D=35 mm, T=8 mm3HAA2166-18VK cover
3HAB9408-1Bearing grease
3HAC023092-001Pressing tool, lower arm
Continues on next page
3HAC039838-001 Revision: C 259
© Copyright 2013 ABB. All rights reserved.
4 Repair
4.4.9 Replacement of parallel arm
To Next Page
Loading...
