3.3.3 Inspecting, oil level gearbox axis 6
Location of gearbox
The axis 6 gearbox is located in the tilthouse unit as shown in this figure.
xx1000001236
Oil plug, fillingA
Oil plug, drainingB
Gearbox, axis 6C
Required equipment
NoteArt. no.Equipment
Kyodo Yushi TMO 1503HAC0860-1Lubricating oil
Content is defined in section
Standard tools on page 351.
-Standard toolkit
These procedures include refer-
ences to the tools required.
Other tools and procedures may
be required. See references to
these procedures in the step-by-
step instructions below.
Continues on next page
3HAC039838-001 Revision: C 109
© Copyright 2013 ABB. All rights reserved.
3 Maintenance
3.3.3 Inspecting, oil level gearbox axis 6
To Next Page
Loading...
