ABB IRB 760 - Calibration Scale and Axis Position

5.3 Calibration scale and correct axis position
Introduction
This section specifies the calibration scale positions and/or correct axis position
for all robot models.
Calibration scales / marks, IRB 760
The illustration shows calibration scale positions on IRB 760.
xx1000001146
Calibration plate, axis 1A
Calibration tab on robotB
Calibration mark, axis 2C
Calibration mark, axis 3D
Calibration plate and marking, axis 6E
Continues on next page
332 3HAC039838-001 Revision: C
© Copyright 2013 ABB. All rights reserved.
5 Calibration information
5.3 Calibration scale and correct axis position