ABB IRB 760 - Risk of Disabling Function Reduced Speed 250 MM;S

1.2.4.5 Risk of disabling function "Reduced speed 250 mm/s"
Note
Do not change Transm gear ratio or other kinematic system parameters from
the FlexPendant or a PC. This will affect the safety function "Reduced speed 250
mm/s".
3HAC039838-001 Revision: C 31
© Copyright 2013 ABB. All rights reserved.
1 Safety
1.2.4.5 Risk of disabling function "Reduced speed 250 mm/s"