3.5 Lubrication activities
3.5.1 Lubricating balancing device bearings and piston rod
Overview
This procedure details how to lubricate the balancing device´s bearings and piston
rod.
Location of bearings and piston rod
This figure shows the location of bearings and piston rod.
Note! Balancing device must be fitted on robot when lubricating bearings!
xx0500002489
Ear (bearing located inside)A
Support washerB
Lock nutC
Piston rodD
Guide ring (not visible in this view)E
Continues on next page
142 3HAC039838-001 Revision: C
© Copyright 2013 ABB. All rights reserved.
3 Maintenance
3.5.1 Lubricating balancing device bearings and piston rod
To Next Page
Loading...
