4.5 Frame and base
4.5.1 Replacing the balancing device
Location, balancing device
The balancing device is located as shown in the figure.
xx1000001110
Balancing deviceA
Required equipment
NoteArt.no.Equipment, etc.
For spare part num-
ber, see Spare parts
on page 355.
Balancing device
Replace if damaged.3HAC037262-001Spacer ring (complete)
M16 x 55-Lock screw
For securing the lower arm.
Continues on next page
3HAC039838-001 Revision: C 265
© Copyright 2013 ABB. All rights reserved.
4 Repair
4.5.1 Replacing the balancing device
To Next Page
Loading...
