NoteArt. no.Equipment, etc.
Content is defined in section Stand-
ard tools on page 351.
Standard toolkit
Other tools and procedures may
be required. See references to
these procedures in the step-by-
step instructions below.
Signal lamp kit
Figure shows signal lamp kit on IRB 760.
xx1000001064
Signal lamp bracketA
Attachment screws for the bracket, M8x12 (2 pcs)B
Attachment screws for the signal lamp (2 pcs)C
Cable straps (2 pcs)D
Cable gland coverE
Motor adapter including gasketF
Attachment screw, M6x40 (1 pc)G
Continues on next page
88 3HAC039838-001 Revision: C
© Copyright 2013 ABB. All rights reserved.
2 Installation and commissioning
2.3.9 Installation of signal lamp, upper arm (option)
Continued
To Next Page
Loading...
