5 User interface specific for MultiMove
5.4. Production Window
3HAC021272-001 Revision: H50
© Copyright 2004-2008 ABB. All rights reserved.
5.4. Production Window
The graphical display
In a system with more than one motion task there will be one tab for each motion task. By
tapping a tab, you can see the program code for that task and where the program pointer and
motion pointer are in that task.
en0400000796
Move program pointer
If you tap Move PP To Main, the program pointer will be moved to main for all motion task
programs.
To Next Page
Loading...
