ABB OmniCore V400XT - Replacing the Internal Fan

5.2.2.2 Replacing the internal fan
Location
The illustration shows the location of the internal fan in the controller.
xx2300001790
Removing the internal fan
Preparations
Note/IllustrationAction
DANGER
Before doing any work inside the cabinet,
disconnect the mains power. For more
information, see Electrical safety on
page 29.
1
Opening the door on page 182.Open the door.2
Continues on next page
192 Product manual - OmniCore V400XT
3HAC081697-001 Revision: A
© Copyright 2022-2023 ABB. All rights reserved.
5 Repair
5.2.2.2 Replacing the internal fan