1.8 Safety during troubleshooting
General
When troubleshooting requires work with power switched on, special considerations
must be taken:
• Safety circuits might be muted or disconnected.
• Electrical parts must be considered as live.
• The manipulator can move unexpectedly at any time.
DANGER
Troubleshooting on the controller while powered on must be performed by
personnel trained by ABB or by ABB field engineers.
A risk assessment must be done to address both robot and robot system specific
hazards.
Related information
See also the safety information related to installation, operation, maintenance, and
repair.
Product manual - OmniCore V400XT 33
3HAC081697-001 Revision: A
© Copyright 2022-2023 ABB. All rights reserved.
1 Safety
1.8 Safety during troubleshooting
To Next Page
Loading...
