5.2.16 Replacing the conveyor tracking module (CTM)
Location
The illustration shows the location of the conveyor tracking module in the controller.
xx2300001793
Required spare parts
Note
The spare part numbers that are listed in the table can be out of date. See the
latest spare parts of the OmniCore V400XT via myABB Business Portal,
www.abb.com/myABB.
NoteArticle numberSpare part
DSQC20003HNA027579-001Conveyor tracking module [3103-
1]
3HNA029345-001CONNECTOR KIT - DSQC2000
Power cable of CTM3HAC084173-001Harness 24V_CTM
3HAC084195-001Ethernet harness for CTM
Continues on next page
272 Product manual - OmniCore V400XT
3HAC081697-001 Revision: A
© Copyright 2022-2023 ABB. All rights reserved.
5 Repair
5.2.16 Replacing the conveyor tracking module (CTM)
To Next Page
Loading...
