ABB OmniCore V400XT - Transporting and Handling; Lifting the Controller Cabinet

3.3 Transporting and handling
3.3.1 Lifting the controller cabinet
Lifting device
Use the four lifting eyes or a forklift when lifting the controller, as shown below.
The following figure shows the maximum angle between the lifting straps when
lifting the controller. The weight of the controller module is detailed in section
Weight on page 38.
°06
xx2100000343
WARNING
When lifting and transporting the cabinet using a forklift, the cabinet door must
be closed to avoid tilting.
WARNING
Stacked cabinets must be lifted separately. Use a suitable lifting accessory to
avoid injury to personnel!
For more information about stacked cabinets, see Securing and stacking the
controller cabinet on page 60.
Product manual - OmniCore V400XT 55
3HAC081697-001 Revision: A
© Copyright 2022-2023 ABB. All rights reserved.
3 Installation and commissioning
3.3.1 Lifting the controller cabinet