ABB OmniCore V400XT - Page 212

Note/IllustrationAction
Remove the magnet part of the antenna
from the cabinet.
5
Removing the Connected Services gateway
Note/IllustrationAction
Disconnect all connectors from the unit
to be replaced.
1
xx2300001836
Carefully pull the side of the Connected
Services gateway and rotate it tightly to
take it out from the bracket.
2
Removing the sim card
Note/IllustrationAction
xx1900000971
Remove the attachment screws and pull
out the front cover of the Connected
Services-3G.
1
Continues on next page
212 Product manual - OmniCore V400XT
3HAC081697-001 Revision: A
© Copyright 2022-2023 ABB. All rights reserved.
5 Repair
5.2.4 Replacing the 3G Connected Services gateway
Continued