ABB OmniCore V400XT - Page 323

Note/IllustrationAction
xx1800001193
Refit the power cable.2
xx1800001748
Reconnect the power cable to the Flex-
Pendant.
3
Screws: Torx pan head screw M4x8 (3 pcs)Refit the power cable cover and tighten
the screws.
4
xx1800001196
Perform the function tests to verify that
the safety features work properly, see
Function tests on page 171.
5
Product manual - OmniCore V400XT 323
3HAC081697-001 Revision: A
© Copyright 2022-2023 ABB. All rights reserved.
5 Repair
5.4.1 Replacing the power cable and power cable cover
Continued