ABB OmniCore V400XT - Page 336

Required documents
NoteArticle numberDocument
3HAC082020-008Circuit diagram - OmniCore
V400XT
Removing the motor connection box battery
Note/IllustrationAction
DANGER
Before doing any work inside the cabinet,
disconnect the mains power. For more
information, see Electrical safety on
page 29.
1
xx2300001703
Remove the screws holding the cover.2
Remove cable ties from battery.3
Disconnect all connectors from the unit
to be replaced.
4
Remove the battery.5
Refitting the motor connection box battery
Note/IllustrationAction
Refit the battery and secure with cable
ties.
1
Reconnect any connectors disconnected
at removal.
2
Continues on next page
336 Product manual - OmniCore V400XT
3HAC081697-001 Revision: A
© Copyright 2022-2023 ABB. All rights reserved.
5 Repair
5.5.3 Replacing the motor connection box battery
Continued