Location of FlexPendant connector
The FlexPendant connector is located on the cabinet door.
xx2300001845
Detaching the FlexPendant in automatic mode
Use the following procedure to detach the FlexPendant in automatic mode:
1 On the status bar, tap the QuickSet button.
Continues on next page
Product manual - OmniCore V400XT 87
3HAC081697-001 Revision: A
© Copyright 2022-2023 ABB. All rights reserved.
3 Installation and commissioning
3.5.7 Detaching and attaching a FlexPendant
Continued
To Next Page
Loading...
