ABB PQFM - Filter Identification

178 The PQF-Manager user interface  Manual Power Quality Filter PQFM
Project:
LV Active Filters PQF
Issued by:
Commissioning report
Date:
Page 1 of 7
8.11.1 Filter identification
Active filter type
(a)
Global ratings
(a)
Maximum voltage (V)
Total current (A)
System serial number
(a)
Common cable entry cubicle
Present/not pres
ent
Unit ratings/serial number
(b)
Rating (A)
Serial number
Article code
(b)
Unit 1 (M)
Unit 2
(M/S)
(d)
Unit 3(M/S)
(d)
Unit 4(M/S)
(d)
Unit 5(M/S)
(d)
Unit 6(M/S)
(d)
Unit 7(M/S)
(d)
Unit 8(M/S)
(d)
Software version
(c)
P
QF
-
Manager software
µ
controller software
DSP software
Installation location
Remarks
:
(a)
Read from main identification tag located on the master cubicle door.
(b)
Read on identification tag located at the outside of each cubicle door.
(c)
After the filter has been commissioned, navigate with the PQF-Manager to [/Welcome/User
interface/About PQF].
(d)
Select whether this unit is a master (M) or a slave (S) unit.