ABB PQFM - Filter Currents

Manual Power Quality Filter PQFM  The PQF-Manager user interface 107
7.8.2.2.1Global values
Irms, I1 and THDI are displayed in table format.
7.8.2.2.2Waveforms
The line current waveforms for all phases (3-W mode) and the neutral current waveform
(4-W mode). The graph layout is similar to the one of the voltages (Figure 78). All
waveforms are synchronized with the rising edge zero crossing of the voltage V (L1-N)
(4-W mode) or V (L1-L2) (3-W mode).
7.8.2.2.3Spectrum
The line current spectrum for all phases (3-W mode) and the neutral current spectrum (4-
W mode) in chart format. The chart layout is similar to the one of the voltages (Figure
79).
7.8.2.2.4Harmonic table
The line current spectrum for all phases (3-W mode) and the neutral current spectrum (4-
W mode) in table format. The table layout is similar to the one of the voltages (Figure
80).
7.8.2.3 Filter currents
Refer toTable 43 for an explanation of the parameters.
PQF Irms in table format for the unit selected with the ‘Select Unit’ option.