6 Introduction Manual Power Quality Filter PQFM
—
1 Introduction to this manual
1.1 What this chapter contains
This chapter gives basic information on this manual.
1.2 Intended audience
This manual is intended for all people that are involved in integrating, installing,
operating and/or maintaining the PQFM active filter range products. People involved in
the integration, installation and maintenance of the equipment are expected to know
the standard electrical wiring practices, electronic components and electrical schematic
symbols. End users should focus on the Operating instructions (Cf. Chapter 9) and
Maintenance instructions (Cf.Chapter 10) of this manual.
1.3 Compatibility
The manual is compatible with all filters of the 3-wire PQFM-range with PQF-Manager
software versions or higher.
− V1 : V26 r3001
− V2 : V11 r23
− V3 : V2 r0
− V4 : V0.1 r8
Technical specifications of this product range are given in Chapter 12 of this manual.
This product is not backward compatible with any other PQFx (x: A, B, L, T, I, M, K, S) filter
product.
1.4 Contents
− Chapter 1: Introduction to this manual
− Chapter 2: Safety instructions
− Chapter 3: Upon reception
− Chapter 4: Hardware description
− Chapter 5: Mechanical design and installation
− Chapter 6: Electrical design and installation
− Chapter 7: The PQF-Manager user interface
− Chapter 8: Commissioning instructions
− Chapter 9: Operating instructions
− Chapter 10: Maintenance instructions
− Chapter 11: Troubleshooting guide
− Chapter 12: Technical specifications
To Next Page
Loading...