ABB PQFM - Filter Identification

200 Maintenance instructions  Manual Power Quality Filter PQFM
Project:
LV Active Filters PQF
Issued by:
Servicing
report
Date:
Page
1
of
4
10.7.1 Filter identification
Active filter type
(a)
Global ratings
(a)
Maximum voltage (V)
Total current (A)
System serial number
(a)
Common cable entry cubic
le
Present/not present
Unit ratings/serial number
(b)
Rating (A)
Serial number
Article code
(b)
Unit 1 (M)
Unit 2 (M/S)
(d)
Unit 3 (M/S)
(d)
Unit 4 (M/S)
(d)
Unit 5 (M/S)
(d)
Unit 6 (M/S)
(d)
Unit 7 (M/S)
(d)
Unit 8 (M/S)
(d)
Software version
(c)
PQF
-
Manager software
µ
controller software
DSP software
Installation location
Remarks:
(a)
Read from main identification tag located on the master cubicle door.
(b)
Read on identification tag located at the outside of each cubicle door.
(c)
After the filter has been commissioned, navigate with the PQF-Manager to to [[/Welcome/User
interface/About PQF].
(d)
Select whether this unit is a master (M) or a slave (S) unit.