61
FEM630 | ELECTROMAGNETIC FLOWMETER | OI/FEM630-EN REV. A
8 ...Operation
Menu levels
Process display
The process display shows the current process values.
There are two menu levels under the process display.
Information level (Operator Menu)
The information level contains the parameters and
information that are relevant for the operator.
The device configuration cannot be changed on this level.
Information level
(Operator Menu)
Autoscroll
Diagnostics
Signals View
Configuration level
(Configuration)
Easy Setup
Device Info
Device Setup
Display
Input/Output
Process Alarm
Diagnostics
Totalizer
Sensor Setup
Process display
Configuration level (Configuration)
The configuration level contains all the parameters required
for device commissioning and
configuration. The device configuration can be changed on
this level.
For additional information on the parameters see Parameter
descriptions on page 77.
To Next Page
Loading...
